product manual:

The GRM series vertical mill is developed by Shanghai Zhuoya. It integrates the advantages of crushing, drying, grinding, and powder selection. It is a product of the grinding industry.

Features:

1. Low operating cost

The grinding roller is used to directly grind the material on the grinding disc, and the energy consumption is low; because the grinding roller is not in direct contact with the grinding disc during work, and the grinding roller and the liner are made of materials, there is little wear and long life.

2. Easy operation and reliable operation

The automatic control system can realize remote control and is easy to operate. It is equipped with a device to prevent direct contact between the roller sleeve and the grinding disc liner to avoid destructive impact and severe vibration; it is more convenient to replace the roller sleeve and liner through the overhaul of the cylinder and the lining loss.

3. Energy saving and environmental protection

The vibration is small, the noise is low, and the equipment is sealed as a whole. The system works under no negative pressure and no dust spills.

 Technical Parameter

Remarks: (Standard for selection of mill)

1. Grindability in raw materials (MF) = 0.9 ~ 1;

2. The upper limit of raw material moisture content is 7%;

3. Finished product fineness 80μR12 ~ M 15%;

4. The moisture content of the finished product: 0.5-1%;

5. The specific installation power and process parameters can be adjusted appropriately according to the performance of the actual material and the requirements of the owner;

6. The above specifications are also suitable for limestone grinding, and the specific model is determined by the material characteristics.